Upload your EFI folder as a ZIP file so someone can review it and identify any possible configuration errors, aside from the already unsupported graphics card. The error "[LOG:EXITBS:START]" can have various causes. Usually, it is due to minor configuration issues that need to be resolved. Below is a list of possible causes that you should check: Config.plist: ACPI Patches: Install the appropriate patches for your hardware. SMBIOS: Use an SMBIOS that matches your hardware. Quirks: Verify the settings and adjust them if necessary. Installed Kexts: Ensure that the kexts used are compatible with your hardware and macOS version. Update the kexts using OCAT (OpenCore Auxiliary Tools). Debugging:: Enable Debug Mode Activate the debug mode in OpenCore. Set the "Target" value in the Config.plist to 67 or 103 to generate a log file in the EFI partition. If other errors occur, upload the boot log here for further analysis. Review the Boot Log Analyze the log file to identify the root cause of the error. Update OpenCore: Update OpenCore and Kexts Make sure you are using the latest version of OpenCore and all relevant kexts. Updates often resolve known issues and improve compatibility. Use OCAT for this purpose. Intel Iris Xe Graphics Support: The Intel Iris Xe Graphics integrated into the Intel Core i5-1135G7 CPU is not natively supported by macOS. If you have managed to boot the system successfully, refer to the guide shared by a user who patched the graphics card for full acceleration. Here’s a helpful thread that might guide you: https://www.insanelymac.com/forum/topic/358305-80-solved-iris-xe-igpu-on-tiger-lake-successfully-loaded-icllp-frambuffer-and-vram-also-recognizes-1536mb-however-some-issues/ Best luck!
Author:
[source]
Post a Comment