Anyone using SSDT-UPWR on Asus Z790 Boards?

Hi,

Just updated my Asus Z790 ProArt BIOS to 2402 to get the intel 0x125 microcode fix.

Now when I leave my computer on overnight I have to do hard restart. Apparently Sonoma at times is failing to wake from sleep. Sometimes this results in log entry regarding EFI error. Sometimes no log entry regarding sleep failure.

In any case, looking here

https://dortania.github.io/OpenCore-Post-Install/usb/misc/instant-wake.html

If I run

pmset -g log | grep -e "Sleep.*due to" -e "Wake.*due to"

I see entries such as the following, and at some point during the time of these entries the computer entered or work from sleep and resulted in me having to do hard restart.

2024-08-05 21:58:28 +0300 DarkWake DarkWake from Normal Sleep [CDN] : due to RTC/Maintenance Using AC (Charge:0%) 0 secs

2024-08-05 21:58:28 +0300 Sleep Entering Sleep state due to 'Maintenance Sleep':TCPKeepAlive=active Using AC (Charge:0%) 584 secs

2024-08-05 22:08:12 +0300 Wake Wake from Normal Sleep [CDNVA] : due to XDCI CNVW/HID Activity Using AC (Charge:0%)

2024-08-05 23:02:18 +0300 Sleep Entering Sleep state due to 'Idle Sleep':TCPKeepAlive=active Using AC (Charge:0%) 6949 secs

2024-08-06 00:58:07 +0300 DarkWake DarkWake from Normal Sleep [CDN] : due to RTC/Maintenance Using AC (Charge:0%) 0 secs

2024-08-06 00:58:07 +0300 Sleep Entering Sleep state due to 'Maintenance Sleep':TCPKeepAlive=active Using AC (Charge:0%) 3667 secs

2024-08-06 01:59:14 +0300 DarkWake DarkWake from Normal Sleep [CDN] : due to RTC/Maintenance Using AC (Charge:0%) 45 secs

2024-08-06 01:59:59 +0300 Sleep Entering Sleep state due to 'Maintenance Sleep':TCPKeepAlive=active Using AC (Charge:0%) 3622 secs

2024-08-06 03:00:21 +0300 DarkWake DarkWake from Normal Sleep [CDN] : due to RTC/Maintenance Using AC (Charge:0%) 0 secs

2024-08-06 03:00:21 +0300 Sleep Entering Sleep state due to 'Maintenance Sleep':TCPKeepAlive=active Using AC (Charge:0%) 283 secs

2024-08-06 03:05:04 +0300 DarkWake DarkWake from Normal Sleep [CDN] : due to RTC/Maintenance Using AC (Charge:0%) 45 secs

2024-08-06 03:05:49 +0300 Sleep Entering Sleep state due to 'Maintenance Sleep':TCPKeepAlive=active Using AC (Charge:0%) 3339 secs

2024-08-06 04:01:28 +0300 DarkWake DarkWake from Normal Sleep [CDN] : due to RTC/Maintenance Using AC (Charge:0%) 0 secs

2024-08-06 04:01:28 +0300 Sleep Entering Sleep state due to 'Maintenance Sleep':TCPKeepAlive=active Using AC (Charge:0%) 3667 secs

2024-08-06 05:02:35 +0300 DarkWake DarkWake from Normal Sleep [CDN] : due to RTC/Maintenance Using AC (Charge:0%) 45 secs

2024-08-06 05:03:20 +0300 Sleep Entering Sleep state due to 'Maintenance Sleep':TCPKeepAlive=active Using AC (Charge:0%) 3622 secs

2024-08-06 06:03:42 +0300 DarkWake DarkWake from Normal Sleep [CDN] : due to RTC/Maintenance Using AC (Charge:0%) 0 secs

2024-08-06 06:03:42 +0300 Sleep Entering Sleep state due to 'Maintenance Sleep':TCPKeepAlive=active Using AC (Charge:0%) 3667 secs

2024-08-06 07:04:49 +0300 DarkWake DarkWake from Normal Sleep [CDN] : due to RTC/Maintenance Using AC (Charge:0%) 45 secs

2024-08-06 07:05:34 +0300 Sleep Entering Sleep state due to 'Maintenance Sleep':TCPKeepAlive=active Using AC (Charge:0%)

Any ideas?

Also, my ACPI does not contain methods UPWR, GPWR. I only see _PWR. So I haven't been applying SSDTs for these.

Curious what seasoned experts say about this.

thanks