Assuming MacMini 2011/2012 iwth SSD running High Sierra. If I upgrade to Monterery or Ventura using OCLP - will all the data/users etc be there, or does the process wipe the drive? It's not totally clear to me from reading the docs. (I know I should back up before doing it).

Any common gotcha's or risks one should know about?

Thanks!

Anybody with a dualboot setup getting banned in said games for the bios settings interfering with kernel level Anticheats in games? If so have you guys found a workaround for it?

If this falls within the “unrelated category “ and should be posted somewhere else feel free to lemme know where to post it. Thanks.

Hi guys, I got a free iMac Late 2013 27" that came with a HDD. I had to remove the hard disk for destruction. So I disassembled the iMac, installed a third party nvme ssd with adapter and realized that the firmware is too old to boot from. The hard drive was recognized by the Sonoma installer I created with OCLP, but the installer with the grey hdd icon did not show up even after many attempts.

I read on the internet that firmware can only be updated with original Apple SSDs. Luckily, I still had one lying around from a 2015 MacBook Pro that I successfully upgraded.

So I took the damn thing apart again, installed the original SSD and finally I was able to install Sonoma and boot normally. Now I have installed the third party ssd again and the same problem persists.

I actually wanted to use the Mac for Linux, but even there, I can't boot.

Please save me from wasting countless more hours. I hope you can help me.

Hello, I have a macbook pro late 2013. I have already upgraded to MacOS12 by using opencore, but now I would like up upgrade to macOS 13, however I do not want to completely reinstall my OS... is there a way to just... upgrade like normal if my machine is already patched?

Desteklenmeyen mac bilgisayarıma OpenCore ile Sonoma kurdum aynı ssd içerisine bootcamp ile de windows 10 kurdum lakin type-c çıkışlarını kullanamamaya başladım sadece şarj oluyordu her şeyi silip tekrar OpenCore ile Sonoma kurdum ve Windows’u nasıl kurmam gerekiyor ki aynı hata ile karşılaşmayayım şimdiden teşekkür ederim :() not: bu konularda çok bilgim yok yorum yaparken beginner olarak anlatırsanız..

Desteklenmeyen mac bilgisayarıma OpenCore ile Sonoma kurdum aynı ssd içerisine bootcamp ile de windows 10 kurdum lakin type-c çıkışlarını kullanamamaya başladım sadece şarj oluyordu her şeyi silip tekrar OpenCore ile Sonoma kurdum ve Windows’u nasıl kurmam gerekiyor ki aynı hata ile karşılaşmayayım şimdiden teşekkür ederim :() not: bu konularda çok bilgim yok yorum yaparken beginner olarak anlatırsanız..

title

Hello do i need to install opencore all over again to update to sonoma 14.6 or can i just update it from the system settings app?

Laptop specs:
CPU - Intel Core i5 7300HQ
GPU - Intel HD Graphics 630 / GeForce GTX 1050 2GB
RAM - 6GB
WiFi - Intel Dual Band Wireless-AC 8265
Audio - Conexant SmartAudio HD

I decided to skip windows and go to Hackintosh OpenCore on BigSur, everything works like the USB ports the sd card reader but the only thing that doesn't work is the touchscreen. I tried downloading some stuff online but that went to a downfall as it didn't boot up again. The usb that I had was already deleted but I got the EFI back using a partition wizard. So I just need help with the touchscreen sorry for the long writing I'm new to reddit 😅

Help!!

Would love throughs and FPS and Setting Level. Since I remember the 6900 XT was quite potent with the propper GPU Fixes, but people keep telling me FPS is kinda low.

I plan to run 4K in 3440x1440

https://youtu.be/EWSnSQX9_w0

Hi so my touchpad on my laptop doesn’t work at all, as far as I’m aware it’s an I2C HID touchpad and I’ve tried all of the VoodooI2C kexts and nothing seems to work at all, any help?

Thanks

I’m planning to install Hackintosh on my laptop for the first time and would love some guidance. Here are my laptop's specs:

My laptop is Asus Vivobook s 14 Flip

• Ryzen 5 5600H
• 16GB DDR4
• 512GB NVMe (Micron 2210 MTFDHBA512QFD)
• MediaTek Wi-Fi 6 MT7921

I’m eager to try macOS and would appreciate any tips, including recommendations on which version of macOS to use. Additionally, if anyone could provide an EFI file or any helpful resources, that would be fantastic.

Thank you in advance for your help!

Hi Guys, im running opencore and macOS Monterey with my Hardware for Years:

It is a Gigabyte Z97X-UD3H Motherboard with a i5 4690k CPU.
Do you have experience with similar hardware and Sonoma? I will try a clean Install.

Hi guys! I tried to install Sonoma on a virtual machine using VMWare Workstation. I did install MacOS but I ran into an issue, that beeing the graphics card. I can't have more then 160+ mb vram, therefore all the system is moving terrible.

I would appreciate some help regarding, what software is best to use in order to access the host GPU? How can I set a higher refresh rate for the screen? Any tips/trick regarding this operation? If you got a yt tutorial that would be perfect.

Thanks in advance.
My host system specs:

i-5 12600KF

RTX 3060

32Gb ram

Hi. I'm trying to make a hackintosh on my HP Probook 455G9 with AMD 5825U APU (Vega 8 Integrated). The problem is BIOS is locked for changing the VRAM even though I have 16GB RAM and NootedRed. Therefore, I can't increase the stock VRAM which is 512mb currently. I tried using Smokeless UMAF but the option for changing the VRAM didn't show up there. What is the way to increase VRAM in this case?

This is my EFI Link

Please, help me someone with efi opencore files for my hackintosh: rx 5600 xt, i3 10105f. Planning to install macos sonoma from clean full image image link.dmg?csf=1&web=1&e=yzk55O)

Found this browsing Github and as I didn't see it posted here (apologies if I missed it) thought it would be of interest. It's the Sequoa support announcement for OCLP 2.0 from Mykola Grymalyuk (khronokernel) himself:

Another year, another WWDC and macOS version. This time with macOS 15, Sequoia, and a surprising lack of dropped hardware compared to previous years 🎉.

As the OS has been in developer beta for a few weeks now, we've compiled a list of challenges the patcher will need to overcome for this fall. This list will likely expand as we determine more issues with older systems.

• Dropped Models
• T2 MacBook Air and OpenCorePkg Challenge
• Trackpad Support
• MacPro3,1 Dual Socket Support
• General patches needing updates:
  • Graphics:
    • Metal 31001
    • Metal 3802
    • Non-Metal
  • Wireless
  • T1 Chip
  • USB 1.1
• Overall timeline for support

Dropped Models

One of the most tame OS releases since macOS Catalina, currently only 2 Macs were dropped:

MacBookAir8,1: MacBook Air (Retina, 13-inch, 2018) MacBookAir8,2: MacBook Air (Retina, 13-inch, 2019) 

T2 MacBook Air and OpenCorePkg Challenge

The current biggest issue we face with supporting the MacBookAir8,x (2018/19) series is the T2 chip's lack of communication when booted through OpenCorePkg.

What happens when one of these units boots through OpenCorePkg is that AppleKeyStore.kext panics due to timeouts with the T2 chip:

"AppleKeyStore":3212:0: sks timeout strike 18 "AppleKeyStore":3212:0: sks timeout strike 19 "AppleKeyStore":3212:0: sks timeout strike 20 panic(cpu 0 caller 0xffffff801cd12509): "AppleSEPManager panic for "AppleKeyStore": sks request timeout" u/AppleSEPManagerIntel.cpp:809 

This affects not only macOS Sequoia, but macOS Ventura and Sonoma are confirmed to have the same issue. Thus an underlying problem with the MacBookAir8,x's firmware where it is not happy with OpenCorePkg.

We currently do not have any leads on what exactly breaks the T2.

• MacBookPro15,2, MacBookPro16,2 and Macmini8,1 do not exhibit these issues in local testing
• MacPro7,1 does seem to surprisingly based on reports: MacPro7,1 - OpenCorePkg
  • Notes from this report were unsuccessful locally: Cannot boot MacPro7,1 #1487

Trackpad Support

Certain Force Touch Trackpads lost support in macOS Sequoia, namely those used by unsupported Macs. The primary issue is simply the loss of identifiers to match onto older hardware.

For most hardware, this has been resolved with the following commit:

• efi_builder: Add SPI trackpad support to Sequoia (ea12d44)
  • MacBookAir8,x is assumed to be broken, however, due to T2 issues, we cannot verify.

MacPro3,1 Dual Socket Support

Currently on macOS Sequoia, MacPro3,1 (2008) fails to boot due to a CPU panic:

processor_boot(): missing for cpu 4 u/processor.c:876 

This is due to the dual socket nature of the machine, and likely some firmware/ACPI table incompatibility. Temporary solution is to use cpus=4 boot argument (limiting to single socket), proper solution is currently unknown.

General patches needing updates

The following patches have broken either partially or entirely. This will require additional work to properly identify issues and solutions:

• Graphics:
  • Metal 31001
    • Intel Broadwell and Skylake
    • AMD legacy GCN, and modern GCN on non-AVX2.0
  • Metal 3802
    • Intel Ivy Bridge and Haswell
    • Nvidia Kepler
  • Non-Metal
    • Intel Iron Lake and Sandy Bridge
    • AMD TeraScale
    • Nvidia Tesla and Web Drivers
• Wireless
• T1 Chip
• USB 1.1

Overall timeline for support

As with every year, we cannot promise when support with be added. However following previous years' predictions, we hope for winter 2024 with OpenCore Legacy Patcher v2.0.0.

Development has been going strong internally and we hope everyone's excited!

For those watching development closely, know there will be a lack of commits for the month of July. This is primarily due to some scheduled surgeries for myself, and other members will be focusing on their amazing research and patch development. Thus the Python patching frontend and likely PatcherSupportPkg will be quiet. We hope to resume commits in August!

I've got an HP Prodesk with i7-7700, 16GB RAM, 256 M.2 and 2TB HDD (no dedicated GPU).

Is it technically (and of course mentally) possible to dual-boot macOS Sequoia on this?

Thanks!

When using safari, the screen goes blank in the Internet browser. If I click out of the screen, I can still operate the scroll on my mouse since I’m using an HP mouse to see what I am looking at. The moment I click on the screen again of the Safari Internet browser it goes blank. Anyone run across this before. It’s kind of annoying, but I can live with it. It’s not my daily driver.

Could I use any USB stick as long as its big enough and it works? I have a Silicon Power 128GB USB drive and it works perfectly fine and I am wondering if I can use that for a hackintosh.

Got into a boot loop, but rebooted once holding Option key and everything worked. Been a full day and no issues. Contrary to some reports, performance is pretty snappy, and actually better than Catalina, IMO.

I have a Late 2013 iMac given to me by a family friend. I get to the boot selection screen fine and select efi boot. It starts and loads for a bit and gets to a screen where the apple logo is there and a bar at the bottom that says “about 29 minutes remaining”. It counts down for about 10 minutes or so then goes black and has a flashing folder icon in the middle of the screen and “support.apple.com/mac/startup” at the bottom.

Trying to upgrade to Sonoma.

Any ideas?

No issues.

• Updated iMac to Ventura 13.6.8 (from 13.6.7) using Software Update. There was also a Safari update.
• At initial boot after update, OCLP prompted me to update the root patches and reboot.

Been up a few hours. Looks good so far.

Hey I installed Mac OS on my notebook and sound doesn’t work. I searched on internet how to fix that but nothing worked. They talked about some codec id or something like that but mine is not supported.

And when I want to have backlight on on my keyboard I press key to turn it on it will but after few seconds it just turn off. I tried to fix it but it didn’t do anything.

Laptop Specs:

Thinkpad E570

i7-7500u

GTX 950M

8GB DDR4

idk what else to put, if you need more info just ask.

Yes or no is it possible? if yes what steps must I take? I know intel HD 620 will work but I want to know if its possible to use the gpu. I'd like to use monterey or above but I will settle for big sur (if it makes any difference).