Hi all,
Have been using OpenCore with Sonoma happily for a while now however a month or so back there was a update and now my USB ports are not being picked up.
I have tested with 2xUSB 2.0 hubs and 1xUSB 3.0 hub as suggested in the troubleshooting online but still no luck.
When I originally did this last time I used a TP-Link usb hub and installed post-patches. I have misplaced this hub and have been trying to use alternatives I have with no luck.
I have made a fresh usb installer and getting the same issue when booting to efi boot on HDD and usb but still not getting the USB devices (mouse and keyboard) recognised and also getting the stop sign half way through loading ( I assume because the usb support drops off mid boot?) When booting into El Capitan everything is normal
Is this a case of the hubs I'm trying to use now are just incompatible or is something else at play here? Is there a work around to this at all?
Thanks in advance
[link] [comments]
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEityVXSF8VS2leRJ9QGVDJzj7gLa21fyI5dhdTbzEiwhSFvmftxsxDvuhYzwW6DMGRga0q3xhg4XvnFFnFFSDJleoiSbIf_yv4GhogOn46KJPJVaDBwP8s-VTxDZlzRHKI1PbGQuu9YKAQtetFbwzGT1liGtGiLeVD7yiCM-z854sqaLcZKZrtBAFPrI7A/s512-rw/opencore-icon.png)
Post a Comment