Hackintosh Guide for Monterey on Razer Blade Advanced 2019

Introduction: This guide provides step-by-step instructions for setting up macOS Monterey on a Razer Blade Advanced 2019 Mercury White edition. This configuration takes advantage of specific kexts and patches to ensure compatibility and functionality, including WiFi, Bluetooth, iMessage, Sleep Mode, Sound, Trackpad, Keyboard, and Camera.

Hardware Specifications:

• CPU: Intel i7 9750H
• RAM: Crucial 2x16GB 3200 MHz
• Motherboard/Laptop Model: Razer Blade Advanced 2019 Mercury White
• Audio Codec: Compatible with AppleALC (exact model unknown)
• WiFi/BT Card: Intel AX200 160MHz
• Touchpad and Touch Display Devices: Compatible with VoodooI2C (exact model unknown)
• BIOS Revision: 1.04

Preparation:

1. Backup Your Data: Ensure all important data on the laptop is backed up.
2. Create a Monterey Installer: Use a Mac or an existing Hackintosh to download macOS Monterey from the App Store. Use the createinstallmedia command to create a bootable USB drive.

BIOS Configuration:

1. Access the BIOS: Restart your Razer Blade and press F2 during boot to enter BIOS.
2. Adjust Settings: Disable Secure Boot, switch SATA Mode to AHCI, and enable VT-x. Make note of the Thunderbolt port configuration for later.

macOS Installation:

1. Boot from USB: Insert your Monterey installation USB. Power on the Razer Blade and press F12 to choose the USB drive as the boot device.
2. Format the SSD: Use Disk Utility to format the SSD using APFS format, GUID Partition Map.
3. Install macOS: Proceed with the installation of macOS Monterey. This process may require several reboots; ensure to select the USB as the boot device each time until macOS is fully installed.

Post-Installation:

1. Bootloader Installation: Use OpenCore as the bootloader for better compatibility. Use a pre-configured EFI folder for your hardware, ensuring to customize it based on your system’s hardware IDs and specifics.
2. Kexts and Patches: Install necessary kexts including:
   • AppleALC for audio.
   • IntelBluetoothFirmware and IntelWireless for WiFi and Bluetooth.
   • VoodooI2C for touchpad functionality.
   • WhateverGreen for graphics support.
3. SSDT Patching for Thunderbolt: Utilize SSDT from HackinDrom, modified to match your Razer Blade’s PCI Device for Thunderbolt functionality.
4. Final Configurations: Configure your system's SMBIOS to mimic a MacBook Pro 2019 for best compatibility. Update your config.plist accordingly.
5. iMessage and Services Setup: Follow online guides to properly set up iMessage and iCloud services by ensuring correct ROM, MLB, and Serial Number configurations in your SMBIOS settings.

Testing and Validation:

1. Functionality Checks: Ensure all previously mentioned components are working as expected. Use System Preferences and third-party apps to test audio, WiFi, Bluetooth, and touchpad functionalities.
2. Geekbench Testing: Run Geekbench to compare performance metrics with equivalent MacBook models.
3. Thunderbolt Testing: Although not initially tested, confirm Thunderbolt functionality through System Report and by connecting Thunderbolt devices.

Notes:

• This guide is based on a specific hardware setup. While most steps are generally applicable, adjustments may be necessary based on hardware revisions and software updates.
• Active participation in Hackintosh communities can provide additional support and updates for long-term system maintenance.

Disclaimer: Creating a Hackintosh may violate Apple's End User License Agreement. This guide is for educational purposes only.