Share
Share
Share

Ryzentosh Success Story: AMD Ryzen 7 5800X with RX 570 on MacOS Sonoma

GUIDE #1


Guide Step by Step:

  1. Gather Your Components:

    • CPU: AMD Ryzen 7 5800X
    • GPU: AMD Radeon RX570 4GB
    • RAM: ADATA XPG DDR4-3200 8GB x 4
    • Motherboard: ASUS ROG B550F (with Wi-Fi)
    • Ethernet Card: Intel I225-V(3) onboard
    • Wi-Fi/BT Card: Intel AX200 onboard

  2. Prepare the Installation Media:

    • Create a bootable macOS Sonoma USB drive following the OpenCore Install Guide.

  3. EFI Configuration:

    • Configure your EFI following the OpenCore guide specific for AMD systems.
    • Use the provided EFI for reference if needed, but ensure it matches your exact system specs.

  4. BIOS Settings:

    • Update to the latest BIOS version for your ASUS ROG B550F.
    • Adjust settings for compatibility (e.g., disable CSM, enable XHCI handoff).

  5. Install macOS Sonoma:

    • Follow the guide to install macOS, making sure not to connect the Ethernet cable during this process.

  6. Post-Installation:

    • Install OpenCore to the EFI partition of your SSD/HDD where macOS is installed.
    • Configure your system's SMBIOS as iMacPro1,1 in your config.plist.

  7. Fixing Not Working Components:

    • Bluetooth: Check for the latest kexts compatible with Intel AX200 and macOS Sonoma.
    • Ethernet: Troubleshoot with the latest IntelMausi kext, and check the community forums for specific issues with the I225-V.
    • iServices: Follow the OpenCore Post-Install guide to troubleshoot iServices.

  8. Dual Boot Considerations:

    • If planning to dual boot, remove the other drives during the installation of macOS to prevent boot conflicts.

  9. Final Touches:

    • Ensure all drivers and kexts are up to date.
    • Fine-tune your config.plist based on post-installation behavior and performance.

  10. Testing and Troubleshooting:

    • Thoroughly test all components, including USB ports, audio, graphics, and power management.
    • Use forums and community resources for troubleshooting any remaining issues.

  11. Enjoy Your Ryzentosh:

    • With everything up and running smoothly, you can now enjoy your successful Ryzentosh build.

Credits and Resources:

Note: Hackintoshing can be a complex process, and the success of such projects heavily relies on the community and developers who contribute to the wealth of knowledge and resources available. Always check the latest compatibility lists and guides as the Hackintosh landscape can change with new updates to macOS.

GUIDE #2

Based on the provided information, it seems that you are looking for specific details on setting up the Ryzentosh configuration with the given hardware and EFI link. Here are some steps to help you get started:
  1. Prepare your hardware: Ensure that your hardware is compatible with macOS and that you have the necessary tools and knowledge to work with it. This includes a basic understanding of command lines and how to use a terminal or command prompt
    7
    .
  2. Download the appropriate OpenCore version: Since you are using an AMD Ryzen 7 5800X CPU, AMD Radeon RX570 4GB GPU, and an ASUS ROG B550F motherboard, you may want to use the OpenCore version 0.9.7, as suggested in the Dortania's OpenCore Install Guide
    1
    .
  3. Prepare your EFI: Follow the instructions provided in the guide
    1
     to prepare your EFI, including creating and configuring the necessary files and folders.
  4. Install OpenCore: Refer to the guide
    1
     for detailed instructions on how to install OpenCore on your system. This may include steps such as booting from the OpenCore USB, enabling BIOS settings optimal for macOS, and waiting for the system to restart.
  5. Configure OpenCore: After installing OpenCore, you may need to configure it to work with your specific hardware. This can be done by following the instructions provided in the guide
    1
     or by referring to the OpenCore Multiboot Guide
    9
    .
  6. Install macOS: Once OpenCore is installed and configured, you can proceed with installing macOS. This may involve creating a bootable USB drive, selecting the macOS installer in OpenCore, and following the on-screen instructions
    9
    .
  7. Post-installation: After successfully installing macOS, you may need to perform some post-installation tasks, such as updating your system, installing additional drivers or kexts, and configuring your system for optimal performance.
Please note that the provided information is based on the given hardware and EFI link. If you need more specific guidance, consider referring to the Dortania's OpenCore Install Guide
1
 or seeking help from the community on forums like r/Hackintosh on Reddit
11
.
Success! Ryzentosh on MacOS Sonoma(R7 5800X, RX 570 & ROG B550F)
Success! Ryzentosh on MacOS Sonoma(R7 5800X, RX 570 & ROG B550F)

If u need my EFI for reference, feel free to use it[MY EFI LINK](markhhm/Ryzentosh: AMD Ryzen Hackintosh for ROG B550F, R7 5800X & RX 570 (github.com))
## SPEC
CPU: AMD Ryzen 7 5800X
GPU: AMD Radeon RX570 4gb
RAM: ADATA XPG DDR4-3200 8Gb*4
Motherboard: ASUS ROG B550F(with wifi)
Ethernet Card: Intel I225-V(3) on board
Wifi/BT Card: Intel AX200 on board
OC Version: 0.9.7

## MacOS & Model
OS: Sonoma
Model: iMacPro1,1
## Not working for now
* Blutetooth
* Ethernet(most of the time is ok, sometimes failed, just reactive)
* iServices(not test yet)

Sonoma

## Tips
* don't connect ethernet when installing OS
* remove the other disk(which you want to dual boot)

## Credits and links
* [OpenCore install guide](https://dortania.github.io/OpenCore-Install-Guide)
* [国光的黑苹果安装教程：手把手教你配置 OpenCore](https://apple.sqlsec.com/1-%E5%9F%BA%E7%A1%80%E7%9F%A5%E8%AF%86/)
* Reddit
* Apple & all related developers <3

submitted by /u/Sudden_Brilliant9557
[link] [comments]
[► Source]

Post a Comment