Building a 10th Gen Intel Hackintosh: A Step-by-Step Guide

1. Choosing the Right Hardware:

   - CPU: Since you're interested in 10th Gen Intel CPUs, options like the i5-10600K, i7-10700K, or i9-10900K are great choices. These processors offer a good balance of performance for macOS.

   - GPU: As noted, only certain GPUs are compatible. AMD Radeon cards are the go-to choice. Consider models like the Radeon RX 580, RX 5700 XT, or even the newer RX 6000 series if supported by your macOS version.

   - Motherboard: Look for a motherboard with good support and community feedback. Models from brands like Gigabyte, ASUS, or MSI with Z490 chipsets are typically recommended. Ensure it has firmware settings compatible with macOS.

   - RAM: Get at least 16GB of DDR4 RAM for smooth performance. More RAM is beneficial for demanding tasks.

   - Storage: An NVMe SSD is recommended for faster boot times and performance. Make sure it's compatible with macOS.

   - WiFi & Bluetooth: As not all chipsets are compatible, choose a WiFi card that uses Broadcom chips or consider a Fenvi card, which tends to be Hackintosh-friendly.

2. Preparing for Installation:

   - Download the latest version of macOS from the App Store on a Mac or create an installer using alternative methods if you don't have access to a Mac.

   - Download OpenCore, which is a bootloader used for Hackintosh. Follow the OpenCore Install Guide for detailed instructions.

3. BIOS Configuration:

   - Update your motherboard BIOS to the latest version.

   - Adjust settings for Hackintosh compatibility (e.g., disable Secure Boot, enable AHCI, set DVMT pre-allocated to 64M).

4. Creating the macOS Installer:

   - Use a USB drive (at least 16 GB) to create a bootable macOS installer.

   - Follow the OpenCore guide to properly configure your EFI folder and add necessary kexts and drivers.

5. Install macOS:

   - Boot from your USB drive.

   - Follow the macOS installation process, formatting your SSD using Disk Utility, and then installing macOS.

6. Post-Installation:

   - Once macOS is installed, copy the EFI folder from your USB to the EFI partition of your SSD for booting without the USB.

   - Install necessary kexts for network, audio, and other components.

   - Fine-tune your system, such as enabling iMessage, fixing sleep/wake issues, etc.

7. Testing and Troubleshooting:

   - Check all hardware components are working correctly.

   - If you encounter issues, refer to Hackintosh forums or the troubleshooting sections in the OpenCore guide.

8. Updates and Maintenance:

   - Stay informed about macOS updates and their compatibility with your Hackintosh.

   - Regularly back up your system.

9. Enjoy Your Hackintosh!

   - You now have a fully functional Hackintosh built with 10th Gen Intel parts.

Notes:

- Building a Hackintosh requires patience and willingness to troubleshoot.

- Always refer to the latest resources and guides for compatibility and installation instructions.

- The provided link to Dortania's OpenCore Install Guide is an invaluable resource throughout the process.

Create config.plist:

- The config.plist file is specific to your hardware. Use OpenCore Configurator or a similar tool to create and customize this file based on your motherboard, CPU, GPU, and other components.

- Refer to the OpenCore guide for detailed instructions on creating and customizing your config.plist file.

submitted by /u/RogueGameMonster
[link] [comments]

---