Repairing and Preparing SSD for OCLP Installation on Mac Pro 4.1/5.1

Guide Step by Step:

  1. Understand the Situation: You've encountered repetitive boot issues during the OCLP (OpenCore Legacy Patcher) installation on a Mac Pro 4.1 flashed to 5.1. This can lead to partitioning issues on your SSD.

  2. Backup Your Data: Before proceeding, ensure you have a backup of all important data on the SSD. Repeated installation attempts can sometimes lead to data corruption.

  3. Inspect Existing Partitions: Boot into High Sierra and use Disk Utility to inspect the SSD. Check for any unnecessary partitions that may have been created during previous installation attempts.

  4. Decision on Partitions: If there are partitions related to failed OCLP installations, it's advisable to remove them. Unnecessary partitions can cause confusion in future installations and may even affect the performance of the SSD.

  5. Erase and Repartition the SSD:

    • Open Disk Utility.
    • Select the SSD from the sidebar.
    • Click on 'Erase'.
    • Choose a suitable format (APFS for newer macOS versions, Mac OS Extended for older ones).
    • If planning to install Monterey or later, APFS is recommended.
    • Erase the disk to remove all partitions and data.
  6. Creating a New Partition Scheme:

    • After erasing, you can create new partitions if needed.
    • For a clean OCLP installation, a single partition is generally sufficient.
  7. Reinstall High Sierra:

    • If you haven't already, reinstall High Sierra to ensure a clean starting point.
    • Use this environment to run OCLP.
  8. Prepare for OCLP:

    • Make sure you have the latest version of OCLP.
    • Ensure your Mac Pro's firmware is updated to the latest version compatible with the 5.1 model.
    • Double-check the OCLP settings and configurations, especially those related to your specific hardware.
  9. Run OCLP:

    • Follow the OCLP instructions carefully.
    • Create the OCLP bootable media as directed.
    • Boot from this media and proceed with the installation.
  10. Monitoring Installation Progress:

  • Keep an eye on the installation process.
  • If it repeats or stalls, note at which point this occurs. This information can be crucial for troubleshooting.
  1. Post-Installation Checks:
  • Once OCLP installation completes, check all system functionalities.
  • Pay attention to booting process, graphics output, and overall system stability.
  1. Seek Community Support if Needed:
  • If you encounter issues, consider reaching out to communities specializing in Hackintosh or OCLP installations for tailored advice.
  1. Final Steps:
  • Once Monterey is successfully installed and running, you can restore your data.
  • Ensure all drivers and necessary updates are installed for optimal performance.

Remember, patience and meticulousness are key in troubleshooting and setting up systems like this. Take one step at a time and verify each action for the best results.

how to repair the ssd hdd after multiple failed attempts at installing OCLP on Mac Pro 5.1

how to repair the ssd hdd after multiple failed attempts at installing OCLP on Mac Pro 5.1

I've made several attempts to install OCLP on my Mac Pro 4.1>5.1 (non Metal GPU).

Each time the installation boot just repeated itself: last one it went on all through the night and I gave up early in the morning.

I think I might have had three dozen or more reiteration of the OCLP installation, hoping each time it's actually progressing and expecting a Monterey welcome image!

I'll make another attempt but noticed that my hdd (Samsung ssd 8860 QVO on a Mercury accelsior S pci 2.0 card) has few partitions left from previous attempts:

(ignoring the 2 x 2TB hdd)

-->> Can I leave these as is? or do I have to erase them first?

I've now re-installed High Sierra

https://preview.redd.it/vi4prsp7s4cc1.jpg?width=623&format=pjpg&auto=webp&s=7c18634c21a4baf9f18162fba04106fd6cb90803

submitted by /u/hasanito
[link] [comments]