The ACPI error you're encountering suggests that there's a conflict within the system's ACPI configuration, which can occur due to various reasons in a Hackintosh setup. The error message Namespace lookup failure, AE_ALREADY_EXISTS
indicates that the ACPI interpreter tried to create an object or add a new node to the ACPI namespace, but the node already exists.
Here's a step-by-step approach to address the issue:
Update Your BIOS:
- Ensure your laptop's BIOS is updated to the latest version, as ACPI-related errors can sometimes be resolved with a BIOS update.
Check ACPI Patches:
- Review the ACPI patches applied in your EFI configuration. They should be appropriate for your specific hardware. Overlapping or incorrect patches can cause the namespace conflict error you're seeing.
DSDT/SSDT Extraction and Patching:
- Extract the original DSDT/SSDT from your system and look for the
[SFRZ]
object. It might require manual patching to resolve conflicts, especially for systems with AMD CPUs and Nvidia GPU s.
- Extract the original DSDT/SSDT from your system and look for the
Config.plist Settings:
- Use a plist editor to check your
config.plist
for any settings that might be incorrect or conflicting. Pay special attention to the ACPI section.
- Use a plist editor to check your
Disable Discrete GPU :
Correct SSDT Use:
- If you are using custom SSDTs, ensure that they are tailored to your system. Incorrect SSDT files can easily cause the
AE_ALREADY_EXISTS
error.
- If you are using custom SSDTs, ensure that they are tailored to your system. Incorrect SSDT files can easily cause the
Use Prebuilt SSDTs:
- For AMD systems, it's sometimes better to use prebuilt SSDTs that are known to work with AMD Hackintosh setups. These can be found in various Hackintosh communities.
Rebuild Kext Cache:
- Clear and rebuild your kext cache on the EFI partition using the terminal command
sudo kextcache -i /
.
- Clear and rebuild your kext cache on the EFI partition using the terminal command
Consult Hackintosh Forums:
- Look for guidance specific to the Lenovo IdeaPad Gaming 3 15ARH05 with your CPU and GPU configuration. Others with similar setups may have shared solutions to this problem.
Use Proper Tools:
- Utilize tools like Clover Configurator or OpenCore Configurator to ensure your EFI setup is as per the requirements for your specific hardware.
Community Support:
- Engage with the Hackintosh community for support. Someone may have encountered and solved the same error on the same or similar hardware.
Remember that troubleshooting a Hackintosh can be complex, especially on systems with AMD CPUs, as they're not natively supported by macOS. Adjustments can be trial and error, requiring patience and a methodical approach. Always backup your EFI folder before making changes, so you can revert if necessary.
this error : ACPI Error: [SFRZ] Namespace lookup failure, AR_ALREADY_EXISTS (20160930/dswload-462
laptop specifications:
CPU: AMD Ryzen 5 4600H with Radeon Graphics Cores: 6
GPU: NVIDIA GeForce GTX 1650 4GB
GPU1: AMD Radeon(TM) Graphics 512MB
Audio: Realtek(R) Audio
RAM:16GB

Post a Comment