Resolving Installation Freeze on ASUS ROG STRIX G513IH Hackintosh

Troubleshooting Install Freeze on ASUS ROG STRIX G513IH Hackintosh

Skill Level: Intermediate

Encountering a freeze during macOS installation on an ASUS ROG STRIX G513IH can be frustrating. This guide provides steps to resolve the issue and continue the installation process.

1. Verify BIOS Settings: Ensure that the BIOS is configured correctly for Hackintosh, with the SATA operation mode set to AHCI and secure boot disabled.
2. Check NVMe Configuration: Some NVMe SSDs may need specific drivers or patches. Make sure you have the necessary kexts like NVMeFix (if available for your macOS version) in your EFI folder.
3. Test with a Single SSD: If you have two NVMe drives installed, try the installation process with only one drive connected to isolate the issue.
4. Use Verbose Mode: Boot the installer in verbose mode to identify at which point the system freezes. This can provide clues about the underlying problem.
5. Update EFI Drivers: Make sure that your OpenCore or Clover EFI drivers are up to date, especially those handling USB and SSD interfaces.
6. Check USB Configuration: If you're using USB peripherals, ensure that the USB ports are properly mapped and configured in your EFI.
7. Recreate Installation Media: A corrupted installer can cause freezes. Re-download macOS and create a new bootable USB installer.
8. Reset NVRAM: Sometimes, clearing NVRAM can resolve installation issues. Do this from the OpenCore boot picker if available.

These troubleshooting steps are a starting point. If issues persist, consulting Hackintosh forums with details of where the installation freezes can be helpful.