Hi Everyone.
Sorry for the long post but I tried to include everything. And thanks in advance for all the help.
I do not have a dGPU installed.
I Success fully built a Hackintosh back in September, and everything seems to be working just fine, besides dual monitor. I have searched in posts but none was left with an answer to the issue (none that I could find). I did my research using the resources below.
I have 2 separate SSDs, one for windows, where dual monitor works properly without any issues, and the other one with Success' href='/2020/12/install-macos-mojave-on-supported-pc.html'>Mojave 10.14.6. When booting into Mac, I can see the Apple logo on both screen, but midway through booting, the one connected to HDMI simply turns off, and the main display connected via DP starts flickering. After turning DP one off and on, it works properly but the second one displays no signal. I tried keeping the HDMI one off until it’s booted, but still nothing.
I used latest OpenCore Vanilla at the time.
ACPI: SSDT-AWAC, SSDT-PLUG, SSDT-PMC, and SSDT-USBX.
Kexts: AppleALC, IntelMausiEthernet, Lilu, NVMeFix, SMCProcessor, SMCSuperIO, VirtualSMC, and WhateverGreen.
Drivers: HfsPlus, OpenCanopy, and OpenRuntime.
Attached:
config-Backup.plist / which is the one I’ve been using since the start
https://drive.google.com/file/d/1wWPQVOl2-PEmUNNnS3DVFEy08pmkfHJS/view?usp=sharing
config-Fix.plist / which is the one I tried to modify to try and fix the dual monitor setup.
https://drive.google.com/file/d/1xgNEI_1e6d_K2fDjDQSeon_VHyfy9_aP/view?usp=sharing
IORegistryExplorer 2.png which is a screenshot that shows only one display detected.
Hardware:
ASUS Prime Z390-A Motherboard LGA1151
INTEL Core i7-9700K Coffee Lake
" VRAM (Dynamic, Max): 1536 MB"
AAPL,ig-platform-id: 07009B3E
device-id: 983E0000
Device ID: 0x3E98
Resources:
https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md
https://Dortania.github.io/OpenCore-Post-Install/gpu-patching/intel-patching/connector.html
https://Dortania.github.io/OpenCore-Post-Install/gpu-patching/intel-patching/busid.html#parsing-the-framebuffer
Note: This is what I’ve got from WhateverGreen. It seems the 3 buses are configured to DP.
ID: 3E9B0007, STOLEN: 57 MB, FBMEM: 0 bytes, VRAM: 1536 MB, Flags: 0x00801302
TOTAL STOLEN: 58 MB, TOTAL CURSOR: 1 MB (1572864 bytes), MAX STOLEN: 172 MB, MAX OVERALL: 173 MB (181940224 bytes)
Model name: Intel UHD Graphics 630
Camellia: CamelliaDisabled (0), Freq: 0 Hz, FreqMax: 0 Hz
Mobile: 0, PipeCount: 3, PortCount: 3, FBMemoryCount: 3
[1] busId: 0x05, pipe: 9, type: 0x00000400, flags: 0x000003C7 - ConnectorDP
[2] busId: 0x04, pipe: 10, type: 0x00000400, flags: 0x000003C7 - ConnectorDP
[3] busId: 0x06, pipe: 8, type: 0x00000400, flags: 0x000003C7 - ConnectorDP
01050900 00040000 C7030000
02040A00 00040000 C7030000
03060800 00040000 C7030000
Post a Comment