
panic diag file unavailable, panic occurred prior to initialisation
Hi all, I'm new to Hackintosh. I used OpenCore 0.6.2 to install Success' href='/2020/12/install-macos-catalina-on-supported-pc.html'>Catalina and worked fine for a week and I'm having trouble to get into OS. I need to use "Recovery" option to recover my SSD in order to boot into OS and after I shut down the OS same thing happened again.
I tried to google for a week but I couldn't think of where the problem would occur if I'm able to boot in with "recovering my hard drive"
I tried to switch a different EFI
I tried to recover different date from time machine
Looked through BIOS
CPU 10900k
ASRock Z490 Phantom Gaming-ITX/TB3 LGA 1200 Intel Z490 SATA 6Gb/s Mini ITX Intel Motherboard
SAMSUNG 970 EVO PLUS M.2 2280 1TB PCIe Gen 3.0 x4, NVMe 1.3 V-NAND 3-bit MLC Internal Solid State Drive (SSD) MZ-V7S1T0B/AM
SAPPHIRE NITRO+ Radeon RX 5700 XT 100416NT+8GSR 8GB 256-Bit GDDR6 PCI Express 4.0 x16 ATX Video Card
Bios
Disabled
- Fast Boot
- Secure Boot
Serial/COM PortN/AParallel PortN/A- VT-d
- CSM
Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly)- Intel SGX
- Intel Platform Trust
- CFG Lock (MSR 0xE2 write protection)
#Enable
VT-xN/A- Above 4G decoding
- Hyper-Threading
- Execute Disable Bit
- EHCI/XHCI Hand-off
- OS type: Windows 8.1/10 UEFI Mode
- DVMT Pre-Allocated(iGPU Memory): 64MB
- SATA Mode: AHCI
EFI Link https://www.dropbox.com/s/j7jki0jpu8v5usa/EFI.zip?dl=0

Post a Comment