Hello, i have small challenge for myself. I have made Opencore Hackintosh with Ryzen 3900x, X570 Meg Ace motherboard and RX 580 from Saphire (want to replace with RX5700) in Phanteks P600S case. But due to size of my primary GPU (Asus 2080ti Dual) i am unable to use GPU in 2nd slot to get x8 speeds, so only 3rd slot with x4 available and i using it via riser cable and this slot is too close to PSU cover. So my challenge is how to place both GPU's and Fenvi card for Win gaming and Mac OS on the same board. Easiest option is to place 5700 to the primary slot with lanes from the CPU and 2080ti in 2nd to make it working via chipset, but in this case there will be no space for fenvi card and literally less than 0.5 cm of space undo for 2080ti to get air. Another option is to change current case for the O11 Dynamic XL, as there is plenty of space under bottor pcie slot and i can run GPU from x4 slot if it works like gen4 And one more - make watercooling, really expensive thing to do, don't want to spend a lot off really now. And last one, even more expensive, build another machine for hackintosh. Can someone with X570 to test PCI-e speed with gen3 enabled in bios and compare with gen4?
[link] [comments]
Post a Comment