Hackintosh how to solve High Sierra Problem

Recently, you tried to install Hackintosh in your computer but you get a lot of problems and infinite errors that has no solution. Believe me No one installed Hackintosh Without a Single Problem (Even Original MacBooks )

So, Here in this guide i am going to teach you how to solve most problems in Hackintosh ( If your problem isn't listed Request it in comments )

​

1 - Problem While Booting into Install (Mostly Happens with High Sierra)

If you tried to boot into Hackintosh Installer by USB-Stick, With Verbose mode . You will get this error with empty screen

{Date & Time }iMac.local com.apple.xpc.launchd[1] (com.apple.windowServer) <Notice>: Service only ran for 0 seconds. pushing respawn out by 10 second.

{Date & Time}iMac.local com.apple.xpc.launchd[1] <Error>: Host-level exception raised: pid = 713, thread = 0xb1e7, exception type = 0xd, codes = {0},states = {0}

This Error can happen with two causes 1-Integrated Graphics, If you have NVDIA And Intel OR AMD And Intel you will have this error, It's easy to solve in Desktops rather than Laptops. Don't Worry here is the fixes for both of them

Fix 1 :(Desktop Only) If you have Integrated Graphics with Intel Proccessor like Intel HD 620 OR Intel HD 4000 With a NVDIA Graphic Card. You must disconnect your NVDIA Graphic from your Case. Remove it and try to boot again

Fix 2: (Desktop Only) If you want to remove NVDIA Graphic without removing it from Case, Boot Into Your BIOS And Disable NVDIA Card

Fix For Laptops : you can do as the same steps above. If you can't do any of them either removing card or disabling it you can try this method

Boot into USB And Go to Clover Settings, Then Boot Aurguments and type this : -v -x -f nv_disable=1 maxmem=4096

I