Good evening all, first and foremost thank you so much for your time.
So, I am trying to get my Desktop to run Mojave. Currently I am writing to you with the same Desktop running High Sierra. My build is as follows: MSI z370 SLI Plus mobo, i7-8700k, and right now on High Sierra I am using an nvidia 1070 ti. HOWEVER all of my testing of Mojave (I cant reach the installer, the error attached and more on that below) has been on a RX 560 4GB.
I also included my EFI from the Mojave USB so you can see what I have going on, at least right now- (also I cant boot High Sierra with the RX with my current install it seems to panic - that I did not photograph at this time, not just hang, is this normal? )
To try Mojave, I have been by unplugging the PCIE cables from the 1070 and plugging them into a RX 560 AMD card, currently both are in the machine at the same time yet I simply move the pcie power supply cable to one or the other depending on if I am trying to boot Mojave or High Sierra. (This is probably poor practice - the bios doesn't recognize a card in the slot when I do this so my thoughts were it wouldnt interfere but please, let me know - the 1070 is a BEEYATCH! to get out.) Ultimately My goal is to get the nvidia to shut off when I boot Mojave and use the NVIdA for gaming on windows. I have 2 seperate ssd drives for the OSs and the windows one is unplugged.
The error I get is attached too.
What I have tried: https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/
Also: https://www.elitemacx86.com/threads/guide-msi-z370-sli-plus-i7-8700k-16gb-ram-amd-rx580-wifi.127/
And I've also tried the: https://olarila.com/files/Clover.Folder/CLOVER.SERIES.100.200.300.zip and the error screen I am attaching is again, using the RX 560 and a USB 2 drive, clean Mojave image, and a USB 2 port.
For the vanilla guide I used the most current releases that I could find off of GitHub and the repo provided.
At this time here is my EFI after trying many combos.
https://drive.google.com/file/d/15Qhf7TOZDU5YaKIEpwr-EW929fgyzMkB/view?usp=drivesdk
In my bios I have PEG enabled as well. Rootless=0 does nothing either (a recommendation from elsewhere)
I've read one or two things about people flashing their 560 cards with some sapphire bios? Has anyone heard of this? And then apparently their machine booted...
The thing is no matter what config I use, version of clover, kexts, I get the SAME error at the SAME time. I provided three screens that all contain the same/similar error more or less depending on if I use AppleHDA or not. Thoughts?
https://photos.app.goo.gl/2GuThTvcYyHPJMA76
And yes - I'm aware that other sources on the web are not pure vanilla or not the cleanest nor contain the best information. I do my best to use vanilla guides from here first and then read elsewhere to trouble shoot. I was absolutely not able to find much on this error anywhere hence my sources of info above.
Thank you.
[link] [comments]
Post a Comment