This build of hackintosh has almost everything working OOB.
It's a great budget hackintosh and runs very smooth.
Hardware -
- GA-H110M-H [ $60 ]
- i3-6100 [ $135 ]
- Corsair Carbide Cabinet [ $40 ]
- WD 240GB SATA SSD [ $35 ]
- Corsair VS450 PSU [ $40 ]
- Corsair Vengeance 4GB DDR4 [ $35 ]
Total comes out to be - 345$
All of these can be bought from amazon or newegg.
I didn't have a mac, so to make a bootable mac disk i chose olarila.com
You can get the Mojave image here- https://olarila.com/forum/viewtopic.php?f=51&t=6743
And flash using win32diskimager.
Recommended BIOS settings for the MOBO are-
https://www.youtube.com/watch?v=EU6dsx9Z318&t=433s
After setting BIOS, bootup from USB and install macos normally.
After setting up MacOS,
Mount EFI parts of poth USB and SSD
Delete the Clover folder on SDD's EFI and copy the one from USB
Now you can boot without the need of USB.
The image contains necessary kexts for Ethernet etc.
Sleep, Hibernate, iMessages, FaceTime (requires webcam) works fine!
The only thing we need to is to enable audio.
This can be done by using AppleHDA kext
Download the kext and place it inside Clover>Kext folder on SSD's EFI.
Reboot and voila you have a superb running Hackintosh!
If you need help with anything, just post it in comments I will try my best to help you out!
Thanks to Olarila and Morgonaut.
Good Luck building your Hackintosh!
[link] [comments]
Post a Comment