[success] High Sierra 10.13.2 Kaby Lake - Intel Graphic - M.2 SSD

I messed up my previous installation when I screwed with Bootcamp, the EFI partition was no longer identifiable by the bios, so I took the chance to install High Sierra instead.

After a day and a half spent on this, I finally got it to boot, and not everything is good except for the UI glitching, Basically Chrome browser is 100% unusable, Safari works fine, glitches only when I hover on tabs. I have latest of both IntelGraphicFixup and Lilu installed, even tried passing arguiments "-igfxbeta -lilubeta" because obviously 10.13.2 is not yet supported. But the issue remains unsolved. I'd appreciate it if anyone can offer some insight.

For the curious minds:


CPU: i7 7700k Graphics: Intel HD 630 Mother Board: MSI Z270 Gaming M5 Ram: Corsair 16GB 3200 MHz SSD: 960 Evo 500GB M.2 SSD Cooler: Corsair h100i v2 water cooling Case: Zalman Z9 NEO Monitor: LG 27" 4K

Guides I followed:

Thanks to corpnewt's guide and also Hackintosher

/u/corpnewt's guide used Clover EFI Bootloader and that worked half way, it didn't complete the boot. But the manual clover.plist config in this guide was very helpful.

I tired using 18.3 iMac to avoid using a fakeCPUID, but that didn't work, so I opted for the 17.1

For the arguments, I have to use dart=0 and darkwake=8 for MSI as Hackintosher suggested.

As mentioned before, I need help fixing the glitching, if there is a solution. Also, if I want to dual boot or even triple boot to Linux and Windows. I learned that I shouldn't mess with bootcamp, am I right? So I should partition my disk using diskutil and then continue the normal way?

Thanks to the whole community, you're all amazing

submitted by /u/teamomivida
[link] [comments]