To do this you're going to need to load the Lion version of MultiBeast that you downloaded earlier.
Open that up, click through the install windows, and get to the options page (which should be familiar to you at this point). Here's a look at all your choices and what they do, using our sample build as a guide:
- EasyBeast Install - If your are a noob, this is your first try :)
- UserDSDT Install - This is the option that applies your custom DSDT, but seeing as we took care of that earlier you don't need to check it now.
- System Utilities - It's always a good idea to check System Utilities as it repairs permissions, runs maintenance scripts, and other helpful stuff like that.
- Drivers & Bootloaders - This is the section where you'll be making most of your decisions. You'll have your pick from an array of hardware drivers that will allow everything from audio to Ethernet to function on your hackintosh. All you really need to do is go through this list and select the relevant hardware in your build. If you have Azalia Audio on your motherboard, that generally means selecting ALC8xxHDA and the AppleHDA rollback options. Most graphics cards you use won't require drivers, and so you can often skip the Graphics subsection, but just turning on GraphicsEnabler, which you'll do in the next section. Enabling any of the drivers in the Disk subsection will help provide support for SATA and eSATA hard disks, but they won't be necessary for most users. The miscellaneous sections has a lot of goodies. If your board supports any of them (like USB 3.0, for example), you should check them off for installation. One kext that always seems to make things work better is NullCPUPowerManagement. We recommend installing this as it tends to make a significant difference in performance on some machines. Lastly you have the Bootloaders subsection, which you can skip as the UserDSDT Install process took care of installing the Chimera bootloader earlier.
- Customization - If you're following our guide you're using a pre-edited/patched DSDT file, so the only thing you're going to want to do in this subsection is check off 64-bit Apple Boot Screen (unless your hackintosh has 32-bit hardware) to enable your video card in full force. You probably won't need the other options unless you have a special situation or are troubleshooting an issue.
- OSx86 Software - You don't really need to choose anything in this department, but if you'd like some handy OSx86 tools installed to your Applications folder you can choose them from this section.
SOURCE
Post a Comment